Keston Frame & Header Kits Installationshandbuch PDF herunterladen (Seite 7)

Keston Heat - Frame & Header Kits

IMPORTANT POINTS

Before commencing installation:

If Wall mounting;

• Ensure wall is capable of supporting the weight of boilers to be mounted

• Mark drill points of header using oor mounting template

• Mark height on to the wall from the oor to the top of the boiler

• Ensure oor is at and level and is of suitable load bearing capacity

If Frame mounting;

• The frames must stand on a at and level oor of suitable load bearing

capacity.

• If using a frame kit (UIN 355013) the header must be bolted to the frame before

the hoses are connected to the boiler.

These Installations refer to perpendicular wall and oor. If walls are not

perpendicular, it is recommended that a frame kit be used (UIN 355013). The

correct number of frames should be ordered (1 per boiler).

Allowances must be made for installation where skirting boards or other features

are in place that may affect the nominal installation conditions.

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Keine Kommentare

Keston Frame & Header Kits Installationshandbuch Seite 7